Electra Elite IPK II Document Revision 4C
Alarm Reports 2 - 31
Alarm Reports
Description
The IPK II system logs various errors and reports information about the operation that can be used to
determine the cause of a problem. The system can indicate several errors on the multiline telephone
display, send the information to a printer immediately, or send data at a programmed time. The report
data can also be sent via e-mail.
Alarm Report
The Alarm Reports indicate:
System start-up/upgrade date and time
ETU communication error with date and time and the restoration date and time
Date and time an ETU was removed from the system
Date and time an extension was disconnected from the system
Date and time of any system data change
Enhancements
Version 1500 or higher is required to support this feature.
To Next Page
Loading...
