Electra Elite IPK II Document Revision 4C
Selectable Ring Tones 2 - 877
Selectable Ring Tones
Description
An extension user can change the way trunks or internal calls ring their telephone. Selectable Ring
Tones allow an extension user to set up unique ringing for their calls. This is important in a crowded
work area where several telephones are close together. Because their telephone has a characteristic
ring, the user always can tell when their telephone is ringing.
Conditions
Only ring tones 1-High, 2-Medium, 3-Low are available Electra Elite and D
term
Series E
terminals (DTU/DTP). If the other tones are selected, the terminal rings with a 2-Medium
tone.
Default Setting
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
Distinctive Ringing, Tones and Flash Patterns
To Next Page
Loading...
