Electra Elite IPK II Document Revision 4C
Voice Mail Integration (Analog) 2 - 1067
Operation
Calling your Mailbox
To call your mailbox:
Multiline Terminal
1. Press your Voice Mail key (PRG 15-07 or SC 751: 77) or the Message key.
- OR -
Press Speaker and dial the Voice Mail Master Number. After Voice Mail Answers, dial your mail-
box number.
Your mailbox number is normally the same as your extension number. You may optionally dial a co-worker’s
mailbox - or use this procedure to call your mailbox from a co-worker’s telephone.
- OR -
Press Speaker and dial 8.
2. If requested by Voice Mail, enter your security code.
Ask your Voice Mail system administrator for your security code.
Normally, your Message Waiting LED goes out (if applicable). If it continues to flash, you have unanswered
Message Waiting requests or a new General Message. Go to To check your messages below.
Single Line Telephone
1. Lift the handset and dial 8.
If you are at a co-worker’s telephone, you can dial the Voice Mail master number and your mailbox number
instead. You can also use this procedure from your own telephone to call a co-worker’s mailbox.
2. If requested by Voice Mail, enter your security code.