Electra Elite IPK II Document Revision 4C
Operator 2 - 765
Operator
Description
When an extension user dials 0, calls are routed to a main system operator. The operator can answer
and route outside calls or locate employees using the Page feature.
A maximum of eight operators are available.
Conditions
Tandem Ringing is not supported on an Operator or Attendant Extension.
Attendant extensions can have up to 32 incoming calls queued before additional callers
hear busy tone.
The operator extension cannot be a CAR Key or virtual extension.
When dialing 0 from In-Mail across CCIS and CCISoIP, it follows Program 47-13-01 Key
10.
When dialing 0 from the in-skin Voice Mail across CCIS and CCISoIP, it follows what is in
the operator’s set up.
With Version 1500 and higher, extensions and trunks can be assigned to an operator
group. A call to an operator that is busy rolls to the next operator in the operator group.
Default Setting
Extension 101 is an operator.
System Availability
Terminals
All Stations
Enhancements
Version 1500 and higher allows multiple Operator Groups.
To Next Page
Loading...
