Electra Elite IPK II Document Revision 4C
Reverse Voice Over 2 - 841
Reverse Voice Over
Description
While on a call, Reverse Voice Over lets a busy multiline terminal user make a private Intercom call to an
idle co-worker. The idle co-worker can be at a multiline terminal or single line telephone. The busy user
can press a programmed Reverse Voice Over key to make a private call to a specified co-worker. The
initial caller cannot hear the Reverse Voice Over conversation. The private Intercom call continues until
the Reverse Voice Over caller can press the key again. The initial call can be an outside call or an
Intercom call.
Reverse Voice Over could help a salesman, for example, when placing a call to an important client. The
salesman can talk with the client and give special instructions to a secretary – without interrupting the
initial call.
When the multiline terminal is idle, the Reverse Voice Over key functions the same as a Hotline or
One-Touch key. A multiline terminal Reverse Voice Over key also shows at a glance the status of the
associated extension:
When the destination extension is idle, the Reverse Voice Over provides one button calling to the associated
extension (like a Hotline key). An extension user cannot, however, use the Reverse Voice Over key to
Transfer calls by one-touch operation.
Conditions
An extension can have Reverse Voice Over keys for more than one extension (limited only
by the number of available function keys).
When the destination extension is in Do Not Disturb, a Reverse Voice Over placed to an
extension always rings, regardless of how Handsfree Answerback/Forced Intercom Ringing
is set at the destination.
When the destination extension is not in Do Not Disturb, Reverse Voice Over follows
Handsfree Answerback/Forced Intercom Ringing programming.
Reverse Voice Over requires a uniquely programmed function key.
When the key is. . . The associated extension is. . .
Off Idle
On Busy or call ringing
Fast Flash In Do Not Disturb
To Next Page
Loading...
Need help?
General
