Features and Specifications 2 - 1
Features
2Features
SECTION 1 ABOUT THIS CHAPTER
This chapter provides an alphabetical listing of the features that are
available with the Electra Elite IPK II system.
Each feature provides the following information:
Description – briefly describes the feature and how it is use.
Conditions – provides special operating conditions (if any) that need to be
considered with using the feature.
Default Settings – indicates the factory default setting (if any)
System Availability – describes multiline terminals that can be used with
this feature and lists any additional equipment, such as adapters or ETUs,
that must be installed for this feature to operate.
Programming – lists the memory blocks that support the feature.
Related Features – lists features that are associated with the feature
being described (e.g., the Account Codes feature lists the Speed Dialing
feature in the related features list because speed dialing bins can contain
stored account code (if any).
Operation – provides step-by-step instructions for using the feature.
To Next Page
Loading...
Need help?
General
