NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
Call Forwarding – Centrex 2 - 127
Call Forwarding – Centrex
Description
The Call Forwarding – Centrex feature allows a station to forward an incoming PBX/Centrex CO call to
an outside location using the same PBX/Centrex CO line to free the line for additional use.
Call Forwarding – Centrex supports the following:
 Call Forward – Immediate
 Call Forward – Busy
 Call Forward – No Answer
 Call Forward – Busy/No Answer
Conditions
 Call Forwarding – Centrex calls transferred from another station are forwarded when the
transferred Trunk is assigned as PBX in Program 14-04-01.
 The following incoming calls follow Call Forwarding – Centrex when the incoming trunk is a
PBX/Centrex trunk:
 DIT/ANA
 Station Transfer
 Automated Attendant Transfer
 DISA Calls
 Call Forwarding – Centrex is not supported for Call Forward Both Ring Split.
 A maximum of 24 digits can be assigned in the destination for Call Forwarding – Centrex.
 When a trunk is set to CTX/PBX, and is set for Call Forwarding – Centrex to an incorrect
number, the call recalls and follows CO incoming ringing (i.e., DIL, Normal Ring Group
Programming).
 When Call Forwarding – Centrex is set and all trunks are changed in PRG 14-04-01 from
PBX to Trunk, Call Forward is cleared from memory.
Enhancements
This feature added with Version 1500.

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English