Electra Elite IPK II Document Revision 4C
Programmable Function Keys 2 - 815
Programmable Function Keys
Description
Each multiline terminal has Programmable Function Keys. Programmable Function Keys simplify
placing calls, answering calls and using certain features. You can customize the function of a multiline
terminal’s programmable keys from each multiline terminal. Depending on your telephone style, you can
have either 4, 8, 16 or 32 Programmable Function keys.
Conditions
When a key is programmed using service code 752, it cannot be programmed with a
function using the 751 code until the key is undefined (000). For example with a Park Key
programmed by dialing 752 +
04 must be undefined by dialing 000 before it can be
programmed as a Voice Over key by dialing 751 + 48.
Using Program 92-01 to copy a multiline terminal Programmable Function Keys copies all
the keys whether or not they exist on the telephone to which the programming is being
copied. This may cause confusion when trying to define a key which is already defined but
which does not exist on the telephone (displays as DUPLICATE DATA). It is recommend to
either clear these non-existent keys or to only copy from an extension which has the same
or fewer number of keys than the extension to which the programming is being copied.
When using Program 15-07-01 to program a D16(LD)-R ADM, regardless of the type of
multiline terminal connected, start programming the D16(LD)-R ADM keys at key number
17. Service codes 751 and 752 can also be used to program these keys.
Speed Dialing and One-Touch Calling also offer quick access to calls and features.
Programming a 60-button console requires separate programming.
Enhancements
Version 1500 or higher:
Allows DSS/One-Touch keys to be used for one-touch transfer without using Transfer.
DSS keys distinguish whether the telephone is set for DND/Call Forward All Calls of if the telephone is
off-hook.
In Version 1600 or higher, when a Ring Group call rings a station, a BLF Indication for this station shows idle or
busy based on a new Class of Service option (20-13-49). Prior to this release, the BLF Indication showed busy.
To Next Page
Loading...
Need help?
General
