Last Number Redial 2 - 675
L
Last Number Redial
Description
Last Number Redial allows an extension user to quickly redial the last number dialed. For
example, a user may quickly recall a busy or unanswered number without manually dialing
the digits.
Last Number Redial saves in system memory the last 24 digits a user dials. The number can
be any combination of digits 0~9,
# and . The system remembers the digits regardless of
whether the call was answered, unanswered or busy. The system normally uses the same
trunk group as for the initial call. However, the extension user can preselect a specific trunk if
desired.
When pressing the Redial key, the display indicates REDIAL [
#] / SYS. The user can then
press
# to redial the number displayed, or enter an System Speed Dialing bin number to be
dialed. Pressing the Redial key repeatedly scrolls through the last 10 numbers dialed.
Conditions
Redial List requires a display telephone. Non-display and single line telephones
cannot use this feature.
When using Automatic Route Selection, ARS selects the trunk for the call unless
the user preselects.
Default Setting
Enabled
System Availability
Terminals
All Stations
Required Component(s)
None
To Next Page
Loading...
Need help?
General
