NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
Call Redirect 2 - 159
Call Redirect
Description
Call Redirect allows a multiline terminal user to transfer a call to a predefined destination (such as an
operator, voice mail, or another extension) without answering the call. This can be useful if you are on a
call and another rings in to your extension. You can press the Call Redirect key, to transfer the call,
allowing you to continue with your current call.
This feature works with the following calls:
 Normal trunk call
 DID
 DISA
 DIL
 E&M
 ICM
The following calls cannot be redirected with the feature:
 ACD
 Transferred
 Department Group (all ring mode)
 Door Box
 Virtual Extension
Conditions
 After you press the Call Redirect key, the call does not recall to the extension.
 The predefined destination must be an extension number or voice mail pilot number.
 When a call is Redirected to another phone it does not follow the forwarding on that phone.
Default Setting
Enabled

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English