NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
Repeat Redial 2 - 835
Repeat Redial
Description
If a multiline terminal user places a trunk call that is busy or unanswered, they can have Repeat Redial
try it again later on. The user does not continually have to try the number again – hoping it goes through.
Repeat Redial automatically retries it until the called party answers (the number of retries is based on
system programming).
Conditions
 Lifting the handset during a callout cycle cancels Repeat Redial.
 Other programmed options for outgoing calls can affect how a Repeat Redial call is placed.
Refer to Central Office Calls, Placing options as needed.
 For systems with Automatic Route Selection (ARS), ARS selects the trunk for the Repeat
Redial call.
 Single line telephones cannot use Repeat Redial.
Default Setting
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English