NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
Call Waiting/Camp-On 2 - 161
Call Waiting/Camp-On
Description
With Call Waiting, an extension user may call a busy extension and wait in line (Camp-On) without
hanging up. When the user Camps-On, the system signals the busy extension with two beeps indicating
the waiting call. The call goes through when the busy extension becomes free. Call Waiting helps busy
extension users know when they have additional waiting calls. It also lets callers wait in queue for a
busy extension without being forgotten.
Conditions
 Call Arrival (CAR) Key (virtual extension) keys do not support Call Waiting/Camp-On
Programmable Function keys (code 35).
 If an extension user Camps-On and then hangs up, the system converts the Camp-On to a
callback.
 If an extension busy on a call has Off-Hook Signaling, an incoming Intercom calls rings the
idle second line appearance.
 Off-Hook Signaling allows an extension user to block a caller from dialing 704 to Camp-On
and/or DID callers from automatically camping on.
 Function keys simplify Call Waiting/Camp-On operation.
 An extension user can Transfer a call to a busy extension.
 Trunk Queuing lets an extension user camp-on to a trunk.
 Call Queuing must also be disabled to disable Call Waiting.
Default Setting
Enabled
System Availability
Terminals
Multiline Terminal and Single Line Telephone

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English