Document Revision 4C Electra Elite IPK II
2 - 14 Account Code Entry
Conditions
If a user enters a code that exceeds 16 digits, the system ignores it.
If the system has Account Codes disabled, the digits dialed (e.g.,
1234) appear on the
SMDR report as part of the number dialed.
Do not use
in a PBX access code when using Account Codes. Otherwise, after the , the
trunk stops sending digits to the central office.
Account Codes appear on the SMDR report (even if they are hidden on the telephone
display).
To simplify Account Code Entry, store the Account Code (e.g., 1234) in a One-Touch Key,
and press the key instead of dialing the code.
Speed Dialing bins can contain stored Account Codes. Prevent them from being displayed
using PRG 20-07-04.
Automatic Route Selection (ARS) can force a user to enter an Authorization Code prior to
using a certain route. The system verifies the ARS Authorization Code dialed against the
ARS Authorization Code list (Program 44-03).
Default Settings
Disabled
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Automatic Route Selection
One-Touch Calling