NEC Electra Elite IPK II System - Page 1079

Electra Elite IPK II Document Revision 4C
Virtual Extensions 2 - 1055
 23-04-01 Ringing Line Preference for Virtual Extensions
When an extension has a virtual extension on Function Key, this program determines the priority
(1~4) for a Ring Group for automatically answering ringing calls when the handset is lifted. If
(00) is selected for the Ring Group, when the user lifts the handset, the user can answer a
ringing call from any group.
(default: 00)
Operation
To answer a call ringing a Virtual Extension:
1. Press the flashing Virtual Extension key.
- OR -
Go off-hook.
 PRG 20-10-08 must be set to 1 for extension Class of Service.
To place a call to a Virtual Extension:
1. Go off-hook.
2. Dial the Virtual Extension, or press the Virtual Extension key.
 The operation depends on the setting in PRG 15-02-21.
To place a call from a Virtual Extension:
1. Press the Virtual Extension key.
 The operation depends on the setting in PRG 15-02-21.
2. Place an intercom call or dial a trunk access code to seize an outside line and place your call.
To program a Virtual Extension key on a telephone:
1. Press Speaker.
2. Dial 752.
3. Press the key you want to program.
4. Dial
03.
5. Dial the number of the extension you want to appear on the key.
6. Press Hold once for Immediate Ring (skip to step 8 for Delayed Ring).