NEC Electra Elite IPK II System - Page 1086

Document Revision 4C Electra Elite IPK II
2 - 1062 Voice Mail Integration (Analog)
 11-07-01 Department Group Pilot Numbers – Dial
Assign a Department Group pilot number for the Voice Mail (eight digits maximum). The
extensions are assigned to the group in Program 16-02-01.
(default: No Setting)
 11-11-50 Service Code Setup (for Setup/Entry Operation) – Set Message Waiting Indication
(Version 1500 or higher required)
Assign a Service Code (eight digits maximum) to set a Message Waiting light from an Analog
Voice Mail port.
(default: No Setting)
 11-11-51 Service Code Setup (for Setup/Entry Operation) – Cancel Message Waiting Indication
(Version 1500 or higher required)
Assign a Service Code (eight digits maximum) to cancel a Message Waiting light from an Analog
Voice Mail port.
(default: No Setting)
 15-02-26 Multiline Telephone Basic Data Setup – MSG Key Operation Mode
Determine whether an extension MSG key should function as a Message key (0) or Voice Mail
key (1). If set as a Message key, the user can press the key to call the voice mail only when they
have new messages. If set as a Voice Mail key, it functions as a normal Voice Mail key.
(Default = 0)
 15-02-35 Multiline Telephone Basic Data Setup – Message Waiting Lamp Cycle for Calling
Extension (Version 1600 or higher required)
Select the Message Waiting flash pattern for the station that set the Message Waiting reminder.
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3 (default)
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
 15-02-36 Multiline Telephone Basic Data Setup – Message Waiting Lamp Cycle for Called
Extension (Version 1600 or higher required)
Select the Message Waiting flash pattern for the station that receives the Message Waiting
reminder.
1 = Cycle 1
2 = Cycle 2 (default)
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7