NEC Electra Elite IPK II System - Page 1154

Document Revision 4C Electra Elite IPK II
3 - 10 Codes Tables
727 + 1 or 2 + time, or 727 + 1 or
2 + 9999 to cancel
Check, set or cancel an alarm Alarm -
728 + hour + minutes Set the system Time Time and Date
Clock/Calendar Display
-
729 Check or change ring volume Volume Control
730 Use Remote maintenance - -
732 Place a call on Group Hold Hold -
740 Use System alarm message delete - -
747 +
0 (Cancel)
1 (Trk calls)
2 (Paging, ICM, Call Forward
and transfers)
3 (All calls)
4 (Call Forwards)
Activate Do Not Disturb Do Not Disturb -
749 Place a call on Exclusive Hold at a
SLT set.
Hold -
750 Camp-On to an extension when
calling into the system through the
VRS
Voice Response System
(VRS)
35
751 + key + code Change the function of a
programmable key using 751
service codes
Programmable
Function Keys
-
752 + key + code Change the function of a
programmable key using 752
service codes
One-Touch
Serial Operation
-
753 + bin + number + Hold +
Name + Hold to store
Store Common Abbreviated Dialing
numbers
Abbreviated Dialing -
754 + bin + number + Hold +
Name + Hold to store
Store Group Abbreviated
Dialing numbers
Abbreviated Dialing -
755 + One Touch key + code Program a One-Touch Key or
Personal Speed Dial
One-Touch Dialing -
756 Answer a call ringing a telephone in
your pickup group (except Ring
Group calls)
Group Call Pickup -
757 Park a call or pick up a parked call
at an extension
Park -
Table 3-2 Service Codes by Number (Continued)
Dial this Service Code. . .
1
When you. . . For this feature. . .
Also see
Function Key. . .
1
Except where indicated, dial Service Code from Intercom dial tone (e.g., press idle Speaker key first).