To Next Page

To Previous Page

Electra Elite IPK II Document Revision 4C

Barge-In 2 - 99

 11-16-02 One-Digit Service Code Setup – Barge-In

Set up Item 02 for single digit Barge-In. For example, you can assign Item 02 to use digit 5 for

Barge-In. This allows you to program a function key with an extension number plus the Barge-In

code (i.e., 5). This allows one-touch access to Barge-In for an extension.

 15-07-01 Programmable Function Keys

Assign a function key for Barge-In (code 34).

 20-06-01 Class of Service for Extensions

Assign a Class of Service (1~15) to an extension.

 20-13-10 Class of Service Options (Supplementary Service) – Barge-In Monitor

For extension Class of Service, enable the Barge-In Speech Mode (0) or Monitor Mode (1) at the

initiating extension (i.e., Barge-In initiator).

 20-13-15 Class of Service Options (Supplementary Service) – Barge-In, Initiate

Enable (1)/Disable (0) Barge-In at the initiating extension (i.e., Barge-In initiator).

 20-13-16 Class of Service Options (Supplementary Service) – Barge-In, Receive

Enable (1)/Disable (0) Barge-In at the receiving extension (i.e., Barge-In receive).

 20-13-17 Class of Service Options (Supplementary Service) – Barge-In Tone/Display (Intrusion

Tone)

Enable (1)/Disable (0) the Barge-In (Intrusion) Tone. If disabled, this also turns off the Barge-In

display at the called extension.

 20-13-32 Class of Service Options (Supplementary Service) – Multiple Barge-Ins

Enable (1)/Disable (0 the extension user ability to have multiple users Barge-In to their

conversation.

 20-14-11 Class of Service Options for DISA/E&M – DISA/Tie Trunk Barge-In

Enable (1)/Disable (0 a DISA or tie trunk user from using the Barge-In feature with the service

code defined in Program 11-12-08.

 20-18-07 Service Tone Timers – Intrusion Tone Repeat Time

After a user barges in, the system repeats the Barge-In tone after this time.

 21-01-03 System Options for Outgoing Calls – Trunk Interdigit Time (External)

Program the time an extension must wait before the Barge-In feature can be used on a call (this

time must expire before a call is put in a talk state). This time also affects Voice Over.

Operation

To Barge-In after calling a busy extension:



The time in PRG 21-01-03 must expire before you can Barge-In.

1. Call a busy extension.

2. Press Barge-In key (PRG 15-07-01 or SC 751: 34).

NEC Electra Elite IPK II System User Manual

Questions and Answers: