NEC Electra Elite IPK II System - Page 138

Document Revision 4C Electra Elite IPK II
2 - 114 Call Duration Timer
Programming
 20-13-36 Class of Service Options (Supplementary Service) – Call Duration Timer Display
Enable (1)/Disable (0) an extension Call Timer.
 20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
 20-09-06 Class of Service Options (Incoming Call Service) – Incoming Time Display
If this option is set to 1, the Incoming Call Time is displayed on the multiline terminal LCD while
the telephone is ringing.
 21-01-03 System Options for Outgoing calls – Trunk Interdigit Time (External)
The system waits for this time to expire before starting the Call Timer.
Operation
To time your trunk calls:
1. Place a trunk call.
 The timer starts automatically.