NEC Electra Elite IPK II System - Page 154

Document Revision 4C Electra Elite IPK II
2 - 130 Call Forwarding – Centrex
 24-09-07 Call Forward Split Settings – Call Forwarding Destination for CTX/PBX for Busy (Version
1500 or higher required)
0~9, #,
, P, R, @ (up to 24 digits)
Operation
To activate Call Forwarding – Centrex:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forwarding Split Service Code (default not assigned).
3. Dial 3 (CTX/PBX).
4. Dial 1 (Set).
5. Dial number to Centrex Forward to.
6. Hang up.
To cancel Call Forwarding – Centrex:
1. At a multiline terminal, press Speaker.
- OR -
At a single line telephone, lift the handset.
2. Dial the Call Forward Split Service Code (default not assigned).
3. Dial 0 (Cancel).
4. Dial 3 (CTX/PBX) or 0 (All).