NEC Electra Elite IPK II System - Page 167

Electra Elite IPK II Document Revision 4C
Call Forwarding, Off-Premise 2 - 143
3. Dial trunk port number to be used (001~200).
4. Press Speaker to hang up.
Cancel Automatic Trunk Forwarding:
1. Lift the handset.
2. Dial 734.
3. Dial trunk port number to be used (001~200).
4. Press Speaker to hang up.
Department Group Line Forwarding
Method 1
Set the Destination and Forward the Line:
1. Lift the handset.
2. Dial 604.
3. Dial the Department Group number (01~64) to be defined.
4. Select the time mode (1~8) to be defined.
5. Enter the telephone number, which is the destination of the forwarded trunk.
 The number is stored in the Speed Dial bin number assigned in Program 24-04-01. This entry overwrites any
existing number defined in the bin.
6. Press Hold to accept the entry.
7. Repeat from Step 3 to define another time mode entry or press Speaker to hang up.
Cancel the Line Forwarding:
1. Lift the handset.
2. Dial 604.
3. Dial the Department Group number (01~64) to be defined.
4. Select the time mode (1~8) to be defined.
5. Press the Exit key.
6. Press Speaker to hang up.