NEC Electra Elite IPK II System - Page 232

Document Revision 4C Electra Elite IPK II
2 - 208 Class of Service
05
Dial Number Preview (Preset Dial)
Turn off or on an extension user ability to use Dial
Number Preview.
0 = Off
1 = On
11
06
Toll Restriction Override
Turn off or on Toll Restricting Override (Service Code
663).
0 = Off
1 = On
0 0 21-01-07,
21-07
11-11-36
07
Repeat Redial
Turn off or on an extension user ability to use Repeat
Redial.
0 = Off
1 = On
11
08
Toll Restriction Dial Block
Turn off or on an extension user ability to use Dial Block.
0 = Off
1 = On
00
09
Hotline/Extension Ringdown
Turn off or on Ringdown Extension for extensions with
this COS.
0 = Off
1 = On
00
10
Signal/Voice Call
Turn off or on an extension user ability to force Handsfree
Answerback or Forced Intercom Ringing for outgoing
Intercom calls.
0 = Off
1 = On
11
11
Protect for the Call Mode Switching from Caller
When an extension is set to ring mode for ICM calls,
enable this option to prevent a caller from changing the
call to voice announce mode.
0 = Off
1 = On
00
12
Department Group Step Calling
Turn off or on an extension user ability to use Department
Group Step Calling.
0 = Off
1 = On
11
13
ISDN CLIP
Determine if the ISDN calling line identity presentation
and screening indicators are allowed.
0 = Off
1 = On
00
14
Call Address Information
0 = Off
1 = On
00
15
Block Outgoing Caller ID
Turn off or on the system ability to automatically block
outgoing Caller ID information when a user places a call.
If this option is on, the system automatically inserts the
Caller ID block code
67 (defined in PRG 14-01-21)
before the user dialed digits.
0 = Off
1 = On
0 0 14-01-20
14-01-21
Table 2-7 Class of Service Options (Outgoing Call Service), Program 20-08 (Continued)
Item
No.
Item
Input
Data
Default
Related
ProgramCOS
01~14
COS
15