NEC Electra Elite IPK II System - Page 234

Document Revision 4C Electra Elite IPK II
2 - 210 Class of Service
04
Notification for Incoming Call List Existence
Determine whether or not an extension displays Check
List when an incoming call is missed by a user.
0 = Off
1 = On
0 0 20-09-02
05
Signal/Voice Call
Turn off or on an extension user ability to enable
Handsfree Answerback or Forced Intercom Ringing for
their incoming Intercom calls.
0 = Off
1 = On
1 1 11-11-15
11-11-16
06
Incoming Time Display
If this is set to 1, the Incoming Call Time is displayed on
the multiline terminal LCD while the telephone is ringing.
0 = Off
1 = On
00
07
Call Queuing
Turn off or on and extension user ability to have calls
queued if a call rings the extension when it is busy.
0 = Off
1 = On
1 1 20-13-06
08
Calling Party Information
Turn off or on and extension user ability to display calling
party information on CCIS calls.
0 = Off
1 = On
1 1 50-02-05
Table 2-9 Class of Service Options (Answer Service), Program 20-10
Item
No.
Item
Input
Data
Default
COS
01~14
COS 15
01
Group Call Pickup (Within Group)
Turn off or on Group Call Pickup for calls ringing an extension
Pickup Group and ring group calls (Service Code
#).
0 = Off
1 = On
11
02
Group Call Pickup (Another Group)
Turn off or on Group Call Pickup for calls ringing outside a
group (Service Code 769).
0 = Off
1 = On
11
03
Group Call Pickup for Specific Group
Turn off or on Group Call Pickup for a specific group using
service code 768.
0 = Off
1 = On
11
04
Telephone Call Pickup
Turn off or on an extension user ability to pick up a call ringing
into a Pickup Group (Service Codes
# and 756).
0 = Off
1 = On
11
Table 2-8 Class of Service Options (Incoming Call Service), Program 20-09 (Continued)
Item
No.
Item
Input
Data
Default
Related
ProgramCOS
01~14
COS 15