Document Revision 4C Electra Elite IPK II
2 - 226 Clock/Calendar Display
 20-02-07 System Options for Multiline Telephones – Time and Date Display Mode
Select the display mode (type 1~8) for Time and Date (i.e., time and date format).
 20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
 20-07-03 Class of Service Options (Administrator Level) – Time Setting
Enable (1)/Disable (0) an extension user ability to set the Time.
 99-01-16 System Clock Adjustment
If for any reason the system clock loses or gains time, the system can automatically adjust the
system clock every midnight using this program.
 This program is available only through telephone programming.
 No other programs in 99-01-xx should be adjusted. Leave all other entries at their default setting. This
program is only available through telephone programming.
0 = No adjustment (default)
1~127 = seconds to be added to clock
128~255 = seconds to be backed up on the clock (-128 to -1 seconds)
Operation
The date must be set in system programming (10-01).
To set the system Time:
1. Press Speaker.
2. Dial 728.
3. Dial two digits for the hour (24 hour clock, 13 = 1:00 PM).
4. Dial two digits for the minutes (00~59).
5. Press Speaker to hang up.
To Next Page
Loading...
Need help?
General
