NEC Electra Elite IPK II System - Page 254

Document Revision 4C Electra Elite IPK II
2 - 230 CO Message Waiting Indication
5. Press Feature.
 This operation updates data in PRG 13-04-01, a user can also edit the dial digits in PRG 13-04-01 from
handset-programming or PCPro/WebPro.
To retrieve a Central Office – Message Waiting Indication:
1. Press Feature.
2. Dial 27.
3. Press the CO line key.
 The LCD indicates ERROR if the CO Line is not flashing for a CO Message Waiting.
4. Listen to the message.
 The operation for deletion is based on the remote voice mail system.
5. Hang up.
To clear the Central Office – Message Waiting Indication from an Attendant Position:
1. Press Feature.
2. Dial 20.
3. Press the CO line key.