EasyManua.ls Logo

NEC Electra Elite IPK II System - Page 271

NEC Electra Elite IPK II System
1190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electra Elite IPK II Document Revision 4C
Code Restriction Override 2 - 247
Programming
11-11-34 Service Code Setup (for Setup/Entry Operation) – Temporary Toll Restriction Override
If required, change the service code (775) for Temporary Toll Restriction Override.
11-11-36 Service Code Setup (for Setup/Entry Operation) – Toll Restriction Override
If required, change the service code (663) for Toll Restriction Override.
20-08-06 Class of Service Options (Outgoing Call Service) – Toll Restriction Override
Enable (1)/Disable (0) an extension user ability to use Temporary Toll Restriction Override.
21-01-07 System Options for Outgoing Calls – Toll Restriction Override Time
Set the Toll Restriction Override Time (0~64800 seconds). After dialing the Toll Restriction
Override code, the system removes Toll Restriction for this time.
21-07-01 Toll Restriction Override Password Setup
Assign Toll Restriction Override codes to extensions. Each code must have four digits, using
any combination of 0~9, # and
. Each extension can have a separate code, or many extensions
can share the same override code.
21-14-01 Walking Toll Restriction Password Setup – User ID
Enter the Walking Toll Restriction Override User ID codes (six digits) into tables. Up to 500
different override codes can be entered.
21-14-02 Walking Toll Restriction Password SetupWalking Toll Restriction Class Number
Enter the Walking Toll Restriction Class of Service (1~15) to be used for each table number
assigned in PRG 21-14-01.
35-02-01
through
35-02-18 SMDR Output Options
Assign the output condition for the printer or PC. If the data is set to 1 (output), the symbol of the
call prints as POTA and the password table number is printed as W/@@@ (@@@ is the three
digit table number) in the Account Code area.
Operation
To temporarily override a restricted extension Code Restriction:
You can override restriction for only one call at a time.
1. At the multiline terminal, press Speaker.
- OR -
At single line telephone, lift the handset.
2. Dial 775.
3. Dial the 4-digit Code Restriction Override code.

Table of Contents

Related product manuals