NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
Conference 2 - 253
 While talking on a Virtual Extension, if the station has a call on Hold, a conference call cannot
be established.
 Conferences can range from two groups of 32 parties, or up to 21 groups of three parties or
any combination between until the maximum of 64 conference ports are used for the
conferencing feature.
Default Setting
Enabled
System Availability
Terminals
Multiline and Single Line Terminals
Required Component(s)
None
Related Features
None
Programming
 11-12-08 Service Code Setup (for Service Access) – Barge-In
If required, change the code a user dials to Barge-In to a Conference call. This code is normally
710.
 11-12-47 Service Code Setup (for Service Access) – Call Waiting Answer/Split Answer
If required, change the code a user dials to Split while on a Conference call. This code is
normally 794.
 11-12-57 Service Code Setup (for Service Access) – Tandem Trunking
With two trunks in Conference, press Hold, dial #8, and the Conference/Tandem happens.
 11-12-58 Service Code Setup (for Service Access) – Transfer Into Conference
If required, change the service code used to transfer a call to a Conference call (default: 624).

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English