NEC Electra Elite IPK II System - Page 292

Document Revision 4C Electra Elite IPK II
2 - 268 Cordless Telephone Connection
Default Setting
None
System Availability
Terminals
 Any DTH/DTR terminal with an AP(A)-R or AP(R)-R Unit except the DTR-2DT-1 TEL
 Any DTU/DTP terminal with an APA-U or APR-U Unit except the DTP-2DT-1 TEL
Required Component(s)
2500-type cordless Single Line Telephone
Related Features
Ancillary Device Connection
Programming
 20-07 Class of Service Options (Administrator Level)
Refer to Table 2-6 Class of Service Options (Administrator Level), Program 20-07 on page
2-205.
 20-08 Class of Service Options (Outgoing Call Service)
Refer to Table 2-7 Class of Service Options (Outgoing Call Service), Program 20-08 on page
2-207.
 20-09 Class of Service Options (Incoming Call Service)
Refer to Table 2-8 Class of Service Options (Incoming Call Service), Program 20-09 on page
2-209.
 20-10 Class of Service Options (Answer Service)
Refer to Table 2-9 Class of Service Options (Answer Service), Program 20-10 on page 2-210.
 20-11 Class of Service Options (Hold/Transfer Service)
Refer to Table 2-10 Class of Service Options (Hold/Transfer Service), Program 20-11 on page
2-211.