NEC Electra Elite IPK II System User Manual

Document Revision 4C Electra Elite IPK II
2 - 290 Dialing Number Preview
Programming
 20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
 20-08-05 Class of Service Options (Outgoing Call Service) – Dial Number Preview (Preset Dial)
Turn Off (0) or On (1) the ability to use Dial Number Preview.
Operation
To use Dial Number Preview to place a call (multiline terminal only):
1. Do not lift the handset or press Speaker.
2. To preview any number, dial the number you wish to call.
 With VRS installed, you must first press  to preview the number.
To preview a Speed Dial – System/Group number, press Redial and dial the
Speed Dial – System/Group bin number you want to call.
 The number displays.
3. To dial out the displayed trunk number, press a Line/CAP/Trunk Group key.
 If the previewed number as a trunk access code (e.g., 9), you can press Speaker instead.
- OR -
To dial an Intercom number, press Speaker.
- OR -
To cancel the number without dialing it out, press Hold.

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English