Electra Elite IPK II Document Revision 4C
Digital Voice Mail 2 - 317
If PRG 15-02-26 = 1 (Voice Mail Key):
1. Press the Message key once.
 The voice mail is called.
 When there are new messages, the MW LED on the telephone flashes red.
 With this option set, the MSG key can be used as a Voice Mail key for any function calling voice mail or
transferring a call to voice mail (Hold + MSG + Extension Number).
Leaving A Message (Multiline Terminal Only)
To leave a message in the mailbox of an unanswered extension: (the extension you call can be busy, in
DND or unanswered)
1. Press the Voice Mail key (PRG 15-07 or SC 751: code 77)
- OR -
Dial 8.
 The Voice Mail system prompts you to leave a message.
Forwarding Calls to your Mailbox
To activate or cancel Call Forwarding:
1. Press Speaker (or lift the handset at the single line telephone) and choose from the following dial
access codes:
741 = Call Forward – Immediate
742 = Call Forward – Busy
743 = Call Forward – No Answer
744 = Call Forward – Busy/No Answer
745 = Call Forward – Both Ring
746 = Call Forwarding – Follow Me
2. Dial the Voice Mail master number.
3. Press Speaker to hang up (or hang up handset at the single line telephone).
 Your DND or Call Forwarding (Station) key flashes when Call Forwarding is activated.
Transferring Calls to a Mailbox
To Transfer your active call to a mailbox:
Multiline Terminal
1. Press Hold.
To Next Page
Loading...
Need help?
General
