Document Revision 4C Electra Elite IPK II
2 - 328 Direct Inward Dialing (DID)
When using DID Call by Time Schedule and breaking out the Time Patterns, set the start
time to 00:00 and end time to 00:00 for this feature to operate correctly. Refer to DID Call
by Time Schedule on page 2-325 for more details.
DID Call by Time Schedule Priority is given to the pattern that is set manually. However,
when a time pattern changes with the time schedules set in PRG 22-17, the pattern applied
by the Manual change is canceled and the Time Pattern is given priority
.
When Transfer Operation Mode is set to busy, call queuing must be turned off for it to work.
Default Setting
Disabled
Related Features
Central Office Calls, Answering
Direct Inward Line (DIL)
Direct Inward System Access (DISA)
Off-Hook Signaling
Paging, External
Programmable Function Keys
Station Message Detail Recording
Transfer
Programming
10-03-01 ETU Setup
Set the function of the DID(4)-U( ) ETU port for DID (0).
To Next Page
Loading...
