Document Revision 4C Electra Elite IPK II
2 - 352 Direct Inward System Access (DISA)
6. Dial the number of the extension to be forwarded.
7. Dial 1 to set Call Forwarding or 0 to cancel Call Forwarding.
8. Dial the extension number where the calls are forwarded.
To use the Continue code to extend a DISA call:
1. An external call connects to an external number (either by transferring with Tandem Trunking or by
DISA caller).
2. After the programmed time (Program 25-07-07), a warning tone is heard and the user dials the
Continue code (Program 20-28-01) to extend the conversation.
3. After the programmed time (Program 20-28-03), the warning tone is heard again. After the
programmed time (Program 25-07-08), the call is disconnected if the Continue code is not dialed
again.
To Next Page
Loading...
