NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
Directory Dialing 2 - 367
2. Press the softkey for the Directory Dialing type:
 SYS Company (Common) System Speed Dials
 SPDg Department (Group) Speed Dials
 STA Personal Speed Dials
 EXT Co-worker’s Extensions
 Directory Dialing follows any feature restrictions that your system may have enabled. For example, if your
extension cannot normally use Speed Dial – System/Group/Station, Directory Dialing can not access it either.
3. Dial letter/number range for the party you want to call (e.g., dial 2 for A, B, C or 2).
 You can enter several letters to help narrow the search.
 Press # to enter additional letters on the same key (ex: TOM = 8666#6).
4. Press the Down Arrow softkey to jump to that section.
5. Press the Volume  or  key to scroll through the list.
 If you wait too long between your selections, Directory Dialing automatically cancels.
6. Lift the handset or press the DIAL softkey, or press Speaker to place the selected call.
 If you selected an outside call, it routes according to your system Trunk Group Routing/ARS setup.
To cancel Directory Dialing:
Press the Exit key.

NEC Electra Elite IPK II System Specifications

General

System Type	Hybrid
VoIP Support	Yes
ISDN Support	Yes
T1/E1 Support	Yes
Caller ID	Yes
Voicemail	Yes
Auto Attendant	Yes
Music on Hold	Yes
Conference Calling	Yes
Call Forwarding	Yes
Call Transfer	Yes
Call Waiting	Yes
Power Requirements	100-240 VAC, 50/60 Hz
Type	Telephone System
Analog Ports	Yes
Digital Ports	Yes
Compatibility	NEC Digital and IP Phones, Analog Phones
Dimensions	Varies depending on chassis and expansion cards
Weight	Varies depending on chassis and expansion cards