Document Revision 4C Electra Elite IPK II
2 - 370 Distinctive Ringing, Tones and Flash Patterns
DTU/DTP Style telephones only follow high, mid range and low ring tone settings. They do
not follow Melodies.
If PRG 22-03-01 is set to 0~3 and PRG 15-02-02 is set to 1~3, trunk calls follow the ring
pattern in PRG 22-03-01 and the pitch in PRG 15-02-02.
If PRG 22-03-01 is set to 4~8 and PRG 15-02-02 is set to 1~3, trunk calls follow the ring
pattern in PRG 22-03-01.
If PRG 22-03-01 is set to 0~8 and PRG 15-02-02 is set to 4~8, trunk calls follow the ring
pattern in PRG 15-02-02.
The following voice mail features require system tones be changed in PRG 80-01-02 to
work. Refer to the Programming section of the Digital Voice Mail feature for details.
Call Holding
Busy Greeting
Call Screening
Await Answer Transfer
When a ring group call rings a Single Line Station, the BLF indication shows busy. (Version
2000 or higher required.)
The priority of the Large LED is as follows:
1. CO Call Ringing
2. Message Waiting Received
3. VM Message Waiting
4. Message Waiting Set
Default Setting
Enabled
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
To Next Page
Loading...
