Electra Elite IPK II Document Revision 4C
Elite CallAnalyst 2 - 435
The SMDR call buffer stores 500 calls. The buffer stores calls when the SMDR device is
unavailable. When the buffer fills, the oldest record is deleted to allow the new record to be
saved.
The IPK II SMDR does not provide data to support the tracking of tandem calls or
conference calls. Tandem calls appear as one call in with extension number shown as the
trunk it was answered on, and out with the extension number as the trunk used to make the
call. Conference calls show only the last party to join the conference and the party that
answered the call.
Default Setting
None
System Availability
Terminals
All Terminals:
Incoming CO/PBX Call
Outgoing CO/PBX Call
Conference CO/PBX Call
Transferred CO/PBX Call
Required Component(s)
LAN connection for SMDR over Ethernet
Minimum PC Requirements:
PC with Pentium Processor
64 MB RAM
VGA monitor 800 X 600 resolution (SVGA 1024 X 768 recommended)
Windows 98 (SE), Windows 2000/XP Professional, Windows 2000/2003 server
80 MB free hard drive space
CD-ROM drive (When using CD for installation)
Available serial port and RS-232 cable
To Next Page
Loading...
