NEC Electra Elite IPK II System - Page 475

Electra Elite IPK II Document Revision 4C
Flexible System Numbering 2 - 451
 11-12 Service Code Setup (for Service Access)
Refer to Table 2-22 Service Code Setup (for Service Access), Program 11-12 on page 2-455.
 11-13 Service Code Setup (for ACD)
Refer to Table 2-23 Service Code Setup (for ACD), Program 11-13 on page 2-457.
 11-14 Service Code Setup (for Hotel)
Refer to Table 2-24 Service Code Setup (for Hotel), Program 11-14 on page 2-458.
 11-15 Service Code Setup, Administrative (for Special Access)
Refer to Table 2-25 Service Code Setup, Administrative (for Special Access), Program 11-15 on
page 2-459.
Table 2-20 Service Code Setup (for System Administrator), Program 11-10
Item
No.
Item Terminals Default
Related
Program
01
Night Mode Switching
MLT, SLT 718 12-xx
20-07-01
02
--- Not Used ---
03
Setting the System Time
MLT 728
04
Storing Common Speed Dialing Numbers
MLT 753
05
Storing Group Speed Dialing Numbers
MLT 754
06
Setting the Automatic Transfer for Each Trunk Line
MLT 733 24-04-01
07
Canceling the Automatic Transfer for Each Trunk Line
MLT 734 24-04-01
08
Setting the Destination for Automatic Trunk Transfer
MLT 735 24-04-01
09
--- Not Used ---
10
--- Not Used ---
11
--- Not Used ---
12
Night Mode Switching for Other Group
MLT 618 12-xx
20-07-01
13
--- Not Used ---
14
--- Not Used ---
15
--- Not Used ---
16
Leaving Message Waiting (Requires CPU to be licensed
for Hotel/Motel)
MLT 626 11-11-09
17
Dial Block by Supervisor
MLT 601 90-19
18
Off-Premise Call Forward by Door Box
MLT 722 13-05
19
--- Not Used ---