NEC Electra Elite IPK II System - Page 477

Electra Elite IPK II Document Revision 4C
Flexible System Numbering 2 - 453
09
Answer Message Waiting
MLT, SLT 0 11-10-16
10
Cancel All Messages Waiting
MLT, SLT 773
11
Cancel Message Waiting
MLT, SLT 771
12
Alarm Clock
MLT, SLT 727 20-01-06
13
Display Language Selection for Multiline Terminal
MLT 678 15-02
14
Text Message Setting
MLT No Setting
15
Enable Handsfree Incoming Intercom Calls
MLT 721 20-09-05
20-02-12
16
Force Ringing of Incoming Intercom Calls
MLT 723 20-09-05
20-02-12
17
Programmable Function Key Programming (Dialing 751
Service Code)
MLT 751 15-07
11-11-38
18
BGM On/Off
MLT 725
19
Key Touch Tone On/Off
MLT 724
20
Change Incoming CO and ICM Ring Tones
MLT 720 15-02
21
Check Incoming Ring Tones
MLT 711
22
Extension Name Programming
MLT 700 15-01
23
Second Call for DID/DISA/DIL
MLT 679
24
Change Station Class of Service
Allows an extension user to change the COS of another
extension. Must be allowed in Program 20-13-28.
MLT 677 20-13-28
25
Automatic Transfer Setup for Each Extension Group
MLT, SLT 602 20-11-17
24-05
26
Automatic Transfer Cancellation for Each Extension
Group
MLT, SLT 603
27
Destination of Automatic Transfer Each Extension Group
MLT 604 20-11-17
24-05
28
Delayed Transfer for Every Extension Group
MLT, SLT 605 20-11-17
24-05
24-02-08
29
Delayed Transfer Cancellation for Each Extension Group
MLT, SLT 606 20-11-17
30
DND Setup for Each Extension Group
MLT, SLT 607
31
DND Cancellation for Each Extension Group
MLT, SLT 608
32
--- Not Used ---
Table 2-21 Service Code Setup (for Setup/Entry Operation), Program 11-11 (Continued)
Item
No.
Item Terminals Default
Related
Program