NEC Electra Elite IPK II System - Page 479

Electra Elite IPK II Document Revision 4C
Flexible System Numbering 2 - 455
58
Call Forward with Personal Greeting
MLT, SLT 713
Table 2-22 Service Code Setup (for Service Access), Program 11-12
Item
No.
Item Terminals Default
Related
Program
01
Bypass Call
Activating Call Forwarding/Do Not Disturb Override. This code
is available only if you disable the voice mail Single Digit
dialing code in Program 11-16-09.
MLT, SLT 707 11-16-09
02
Conference
MLT, SLT #1
03
Override (Off-Hook Signaling)
MLT, SLT 709
04
Set Camp-On
MLT, SLT 750
05
Cancel Camp-On
MLT, SLT 770
06
Switching of Voice Call and Signal Call
MLT, SLT 712
07
Step Call
MLT, SLT 708
08
Barge-In
MLT, SLT 710
09
Change to STG (Department Group) All Ring
MLT, SLT No Setting 16-02
10
Station Speed Dialing
MLT, SLT #2
11
Group Speed Dialing
MLT, SLT #4
12
Last Number Dial
MLT, SLT #5
13
Saved Number Dial
MLT, SLT 715
14
Trunk Group Access
MLT, SLT 704
15
Specified Trunk Access
MLT, SLT #9
16
Trunk Access Via Networking
MLT No Setting
17
Clear Last Number Dialing Data
MLT, SLT 776
18
Clear Saved Number Dialing Data
MLT, SLT 785
19
Internal Group Paging
MLT, SLT 701 31-01-01
20
External Paging
MLT, SLT 703
21
Meet-Me Answer to Specified Internal Paging Group
MLT, SLT 764
22
Meet-Me Answer to External Paging
MLT, SLT 765
Table 2-21 Service Code Setup (for Setup/Entry Operation), Program 11-11 (Continued)
Item
No.
Item Terminals Default
Related
Program