Document Revision 4C Electra Elite IPK II
2 - 510 Hotline
A Hotline is a uniquely programmed function key.
Default Setting
Disabled
Related Features
Automatic Call Distribution (ACD)
Distinctive Ringing, Tones and Flash Patterns
Direct Station Selection
Do Not Disturb
Handsfree Answerback/Forced Intercom Ringing
Off-Hook Signaling
Programmable Function Keys
Ringdown Extension, Internal/External
Programming
15-07-01 Programmable Function Keys
Assign a function key for Hotline (code 01 + partner’s extension number).
15-02-22 Multiline Telephone Basic Data Setup – Multiple Incoming From Intercom and Trunk
When this option is set to 0 (Disabled), incoming calls to an extension indicate on any Hotline
keys for that extension as solid (busy). When this option is set to 1 (Enabled), lighting is
determined by the setting of Program 22-01-01 Incoming Call Priority. If set to trunk priority (1),
the Hotline key lights solid when a trunk call rings in. If set to intercom priority (0), the Hotline key
does not light for incoming trunk calls, but lights solid for intercom calls.
To Next Page
Loading...
