Document Revision 4C Electra Elite IPK II
2 - 514 Howler Tone Service
Programming
Changing either of these two programs will require a KSU reset for the changes to take affect.
 80-01-01 Service Tone Setup – Repeat Count
Set repeat count for tone 16 Lockout, default = 0 (endless).
Refer to Table 2-26 Service Tone Setup, Program 80-01-01 on page 2-476.
 80-01-02 Service Tone Setup – Basic Tone Number
(Default: 0).
Refer to Table 2-27 Service Tone Setup, Program 80-01-02 on page 2-480.
 80-02 DTMF Tone Setup
Define the Basic Tone, duration (on time) and pause (off time) for Service Tone 16 Lockout. This
option affects all internal stations system wide. Make separate entry for duration and pause. It is
also possible to adjust both high and low frequency tones.
Operation
Not applicable.