NEC Electra Elite IPK II System User Manual

Document Revision 4C Electra Elite IPK II
2 - 574 IP Trunk – (SIP) Session Initiation Protocol
Conditions
None
Default Setting
None
System Availability
Terminals
All Multiline Terminals
Required Component(s)
IAD(8)-U10 ETU – SIP package
Related Features
None
Programming
 10-03-01 ETU Setup
 11-01-01 System Numbering
 14-02-01 Analog Trunk Data setup – Signaling Type (DP/DTMF)
At default, PRG 14-02-01 is set to 2 (DTMF). For the IAD trunks this must be set for Dial Pulse
[either 0 (10PPS) or 1 (20PPS)].
 14-05-01 Trunk Group – Trunk Group Number
 44-02-01
through
44-02-03 Dial Analysis Table for ARS/F-Route Access

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English