NEC Electra Elite IPK II System - Page 616

Document Revision 4C Electra Elite IPK II
2 - 592 IP Trunk (SIP) – MG16
 90-11-01
through
90-11-13 System Alarm Report
Define the details of the system alarm report (multiline terminal to display alarms and Email
notification setup).
SIP Trunk Registration Information Setup
 10-36-01 SIP Trunk Registration Information Setup – Registration
Enable (1)/Disable (0) the SIP trunk registration.
(Default: 0)
 10-36-02 SIP Trunk Registration Information Setup – User ID
Define the user ID.
Entries: 32 characters maximum
(Default: None)
 10-36-03 SIP Trunk Registration Information Setup – Authentication User ID
Define the authentication user ID.
Entries: 48 characters maximum
(Default: None)
 10-36-04 SIP Trunk Registration Information Setup – Authentication Password
Define the authentication password.
Entries: 32 characters maximum
(Default: None)
SIP UPnP
 10-37-01 UPnP Setup – UPnP Mode
Enable (1)/Disable (0) UPnP task. If UPnP (Universal Plug and Play) task starts, it obtains a
NAPT router WAN IP Address by using NAT traversal and saves it in PRG 10-12-07
automatically.
(Default: 0)
 10-37-02 UPnP Setup – Retry Time
UPnP task tries to obtain the WAN IP Address of the NAPT router during this time (0~3600
seconds).
(Default: 60)