NEC Electra Elite IPK II System - Page 678

Document Revision 4C Electra Elite IPK II
2 - 654 ISDN Compatibility
B
Is the amount of time the system waits before
placing the call in a talk state sufficient?
In 21-01-03, enter
the interval for the
trunk interdigit timer.
Should extension users
have one-button placing
of outside calls?
Should extension users have
one-button access to trunk
groups for placing calls?
In 15-07-01, do not assign
function keys as line keys.
In 15-07-01, assign
function keys as line
keys (code *01+001- 200).
In 15-07-01, assign CAP Keys
(*08) or line group keys (*02).
In 15-07-01, do not
assign Trunk Group
Access or trunk group keys.
Do you want to adjust
the gain (volume) for
trunks?
Adjust the CODEC Gain
in 14-01-02 (transmit)
and 14-01-03 (receive).
Check the Analog Trunk Timers in 81-01
for compatibility with the telco.
If desired, assign names to
trunks in 14-01-01.
Do you want to set up
an Alternate Trunk
Route Access Code?
Stop
In 11-01-01, set up a
Service Code for
Alternate Trunk Route
Access.
No
Yes
No Yes
YesNo
See "CAP Key" in the
Feature & Specification
manual for more details.
Trunks
No
YesNo
For example, to make
50 the Alternate Trunk
Route Access Code:
DIAL = 5
Digit = 2
Kind = 8
In 11-09-02, assign the
Service Code set up in the
previous step for Alternate
Trunk Route Access.
Should extension be
able to use Alternate
Trunk Route Access?
In 21-15-01, enter the
extension number and
enter the Trunk Group
Routing route number.
In 21-15-01, enter the
extension number
and enter 0 to
prevent routing.
NoYes
Is Trunk Group
Routing defined?
Refer to the Trunk
Group Routing
feature and set up
Trunk Group
Routing.
Stop