Document Revision 4C Electra Elite IPK II
2 - 44 Alphanumeric Display
Programming
11-11-13 Service Code Setup (for Setup/Entry Operation) – Display Language Selection for
Multiline Terminal
If needed, redefine the service code used to select the language for display multiline terminals
(default: 678).
15-02-01 Multiline Telephone Basic Data Setup – Display Language Selection
Select the language to be displayed on a multiline terminal display.
20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
20-11-08 Class of Service Options (Hold/Transfer Service) – Transfer Information Display
Enable (1)/Disable (0) an extension incoming transfer preanswer display.
Operation
Operation is automatic if enabled in programming.
0 = Japanese 5 = Spanish 10 = Swedish
1 = English 6 = Dutch 11 = Turkish
2 = German 7 = Portuguese 12 = Latin American Spanish
3 = French 8 = Norwegian
4 = Italian 9 = Danish
To Next Page
Loading...
