NEC Electra Elite IPK II System - Page 694

Document Revision 4C Electra Elite IPK II
2 - 670 K-CCIS – T1
 Direct Inward Dialing – K-CCIS
 Dual Hold – K-CCIS
 Elapsed Time Display – K-CCIS
 Flexible Numbering of Stations – K-CCIS
 Hands-Free Answerback – K-CCIS
 Hot Line – K-CCIS
 IP (K-CCIS)
 IP (K-CCIS) to NEAX (Point-to-Multipoint)
 Link Reconnect – K-CCIS
 Multiple Call Forwarding – All Calls – K-CCIS
 Multiple Call Forwarding – Busy/No Answer – K-CCIS
 Paging Access – K-CCIS
 Quick Transfer to Voice Mail – K-CCIS
 Station-to-Station Calling – K-CCIS
 Uniform Numbering Plan – K-CCIS
 Voice Call – K-CCIS
 Voice Mail Integration – K-CCIS 

Not supported with In-Mail.
Conditions
 Each Electra Elite IPK II system can have up to four K-CCIS routes.
 One DTI-U( ) ETU can be used to support/connect a maximum of four K-CCIS Links.
 The Basic Port Package can have up to 63 DTI trunks for K-CCIS voice path.
 The Expanded Port Package can have up to 199 DTI trunks for K-CCIS voice path.
 The K-CCIS feature shares the CO/PBX/Tie/DID trunks available for the system.
 When assigning a Closed Numbering Plan and DID conversion across K-CCIS is required,
the Electra Elite IPK II uses the ARS/F-Route Tables.
 The Electra Elite IPK II uses the F-Route Tables to assign an Open Numbering Plan.
 When all K-CCIS voice channels are busy, the Electra Elite IPK II originator of a K-CCIS
call hears a busy tone from the system.