NEC Electra Elite IPK II System User Manual

Document Revision 4C Electra Elite IPK II
2 - 696 Meet Me Paging
Related Features
Meet Me Conference
Meet Me Paging Transfer
Paging, External
Paging, Internal
Programmable Function Keys
Programming
 For additional programming information on Paging, refer to the Paging, External and Paging, Internal
features.
 15-07-01 Programmable Function Keys
Assign function keys for External Zone Paging (code 19 + zone), External All Call Paging (code
20), Internal Zone Paging (code 21 + zone) or Meet Me Conference/Paging Pickup (code 23).
 20-06-01 Class of Service for Extensions
Assign a Class of Service (1~15) to an extension.
 20-10-06 Class of Service Options (Answer Service) – Meet-Me Conference and Paging
Enable (1)/Disable (0) an extension user ability to initiate a Meet Me Conference or Meet Me
Page.
Operation
Meet Me External Page
To make a Meet Me External Page:
1. At multiline terminal, press Speaker or pick up the handset.
- OR -
At the single line telephone, lift the handset.
2. Dial 703 and the External Paging Zone code (1~8 or 0 for All Call).
- OR -
Dial 1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for
Internal/External All Call).

NEC Electra Elite IPK II System Specifications

General

System Type	Hybrid
VoIP Support	Yes
ISDN Support	Yes
T1/E1 Support	Yes
Caller ID	Yes
Voicemail	Yes
Auto Attendant	Yes
Music on Hold	Yes
Conference Calling	Yes
Call Forwarding	Yes
Call Transfer	Yes
Call Waiting	Yes
Power Requirements	100-240 VAC, 50/60 Hz
Type	Telephone System
Analog Ports	Yes
Digital Ports	Yes
Compatibility	NEC Digital and IP Phones, Analog Phones
Dimensions	Varies depending on chassis and expansion cards
Weight	Varies depending on chassis and expansion cards