NEC Electra Elite IPK II System - Page 726

Document Revision 4C Electra Elite IPK II
2 - 702 Meet Me Paging Transfer
2. Press Internal Paging Zone key (PRG 15-07 or SC 751: 20 + zone).
- OR -
Dial 701 and the Internal Paging Zone code (0~9 or 00~64).
- OR -
Dial 1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for
Internal/External All Call).
3. Announce the call.
4. From a multiline terminal, when the paged party answers, press Transfer or the Transfer softkey.
- OR -
From a single line telephone, when the paged party answers, hang up.
 The party is transferred.
To join a Meet Me Internal Paging Transfer:
1. At the multiline terminal, press Speaker or pick up handset.
- OR -
At the single line telephone, lift the handset.
2. Dial 763 (if your extension is in the zone called).
- OR -
Dial 764 and the zone number (if your extension is not in the zone called).
- OR -
Press the Meet Me Conference/Paging Pickup key (PRG 15-07 or SC 751: 23) if your extension is
in the zone called.
3. Stay on the line.
From a multiline terminal, when the paged party answers, press Transfer or the Transfer softkey.
- OR -
From a single line telephone, when the paged party answers, hang up.
 The party is transferred.