Electra Elite IPK II Document Revision 4C
Message Waiting 2 - 709
Default Setting
Enabled
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Handsfree Answerback/Forced Intercom Ringing
Hotel/Motel
Programmable Function Keys
Voice Mail Message Indication on Line Keys
Voice Response System (VRS)
Programming
ļ 15-02-28 Multiline Telephone Basic Data Setup ā Message Waiting Lamp Color
Select whether the Message Wait LED located at the top of the multiline terminal flashes green
(0) or red (1) when a Message Wait indication is flashing. If this LED is also used for voice mail
indications (no Programmable Function Key programmed for voice mail), if there are both voice
mail messages and Message Wait indications, the color set for Message Wait overrides the
color used for voice mail indications.
(default: 1)
To Next Page
Loading...
