NEC Electra Elite IPK II System User Manual

Document Revision 4C Electra Elite IPK II
2 - 750 Night Service
 31-05-01 Universal Night Answer/Ring Over Page
For each Night Service Mode, assign which trunks should ring which External Paging Zones.
Operation
To activate Night Service by dialing codes:
1. At a Multiline Terminal, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 718. To change a different group’s mode, dial 718 + the group number (01~32).
3. Dial the Night Service Code:
1 = Day 1 Mode
2 = Night 1 Mode
3 = Midnight 1 Mode
4 = Rest 1 Mode
5 = Day 2 Mode
6 = Night 2 Mode
7 = Midnight 2 Mode
8 = Rest 2 Mode
4. Press Speaker or hang up.
To activate Night Service by using programmable keys:
1. Press Night Service key (PRG 15-07-01 or SC 751:09 + Mode code number below).
1 = Day 1 Mode
2 = Night 1 Mode
3 = Midnight 1 Mode
4 = Rest 1 Mode
5 = Day 2 Mode
6 = Night 2 Mode
7 = Midnight 2 Mode
8 = Rest 2 Mode
To transfer a call to the Universal Answer External Page zones:
1. Place the CO call on hold and dial the Transfer to Trunk Ring Group code (assigned in PRG
11-15-09).
 You hear a confirmation tone.
2. Hang up.
 The call rings over the External Paging, enabling anyone to answer the call.

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English