NEC Electra Elite IPK II System - Page 801

Electra Elite IPK II Document Revision 4C
Paging, Internal 2 - 777
 20-13-29 Class of Service Options (Supplementary Service) – Paging Display
Turn Off (0) or On (1) an extension user ability to display incoming internal paging
information.(Default: 1)
 31-01-01 System Options for Internal/External Paging – All Call Paging Zone Name
Assign a name to the All Call Internal Paging Zone. The name shows on the display of the
telephone making the announcement.
(default: Group All)
 31-01-02 System Options for Internal/External Paging – Page Announcement Duration
Set the maximum allowable duration (0~64800 seconds) for a Paging announcement.
(default: 1200)
 31-02-01 Internal Paging Group Assignment – Internal Paging Group Number
Assign extensions to Internal Paging Zones. An extension must be assigned to a 2-digit zone to
access any 2-digit zone.
Internal Page Zones: 0, 1~9, 00, 01~64
[default: 0 (IP Station); 1 (TDM)]
 31-02-02 Internal Paging Group Assignment – Internal All Call Paging Receiving
Allow (1)/Prevent (0) All Call Internal Paging for each extension. If allowed, extensions can
make and receive All Call Internal Paging announcements. If prevented, extension can make
only All Call Internal Paging announcements.
(default: 0)
 31-03-01 Internal Paging Group Settings – Internal Paging Group Name
Program names (up to 12 characters) for the Internal Paging Zones.
(default: External Paging Group 0~64 = Group 1~ Group 64)
 31-03-02 Internal Paging Group Settings – Internal Paging Splash Tone
For each Internal Paging Zone, have normal (0), muted (1) or no (2) Internal Paging alert tones.
If enabled (0 or 1), extensions hear two beeps before Paging announcements. If disabled, the
extensions hear the announcement without the beeps.
Internal Page Zones: 0, 1~9, 00, 01~64
(default: 0)
 31-07-01 Combined Paging Assignments
For each External Paging Group (1~8 and 0 for All Call), assign a corresponding Internal Zone
for Combined Paging.
Internal Page Zones: 0, 1~9, 00, 01~64
(default:1)
Operation
To make an Internal Page announcement:
Multiline Terminal
1. Press the zone Internal Paging key (PRG 15-07 or SC 751: 21 + 0 or 1~9 or 01~64 for zones (0 or