Electra Elite IPK II Document Revision 4C
Park 2 - 785
To display Caller ID for a call in Park:
With Program 15-02-08 set to 0 (preselect) for this feature.
1. With Program 15-02-08 set to 0 (preselect) and a call in Park, press the Park key. (PRG 15-07 or
SC 752:
04).
- OR -
With Program 15-02-08 set to 1 (One-Touch), and a call in Park, press Feature, then the Park key
(PRG 15-07 or SC 752:
04).
Call Park – Step Call: (Version 2000 or higher required)
To Park a call in the first available system orbit:
You can Park Intercom or trunk calls.
1. Press Hold or Transfer.
2. Dial
#6.
If you hear a busy tone, the orbit is busy. Proceed to step 3.
3. Dial .
Program 20-11-27 must be enabled in the Multiline Terminals Class of Service.
4. Press Speaker to hang up.
If not picked up, the call recalls to you.
- OR -
1. Press Hold or Transfer.
2. Press the DSS/BLF key programmed as
#6
(The Park location is displayed in the LCD).
3. Press Speaker to hang up.
To Next Page
Loading...
